PGDK · Steel-Plastic Pipe

Medical-Grade Steel-Plastic Composite Pipe

Flame-retardant and antistatic, −20 to 90 °C, aggressive media

Medical-Grade Steel-Plastic Composite Pipe

Overview

A composite pipe extruded from a perforated cold-rolled steel core with a flame-retardant, antistatic heat-resistant polyethylene matrix. Rated for media from −20 to 90 °C where flame retardancy and antistatic performance are mandatory, it handles pharmaceutical waste water, waste liquor and off-gas, and also the transfer of gases, fumes and corrosive materials. Used across pharmaceutical, chemical, petroleum, metallurgical and mining sites requiring permanent antistatic protection.

PharmaceuticalChemicalCoal miningMetallurgy

Characteristics

  • 01Meets underground-mine gas-drainage flame-retardant and antistatic standards — prevents static dust attraction, shock and spark discharge
  • 02Handles positive pressure and vacuum duty alike
  • 03Resists concentrated acids, alkalis and salts plus acetone, ethyl acetate and similar solvents from −20 to 90 °C
  • 04Smooth bore, low flow resistance, no scaling
  • 05Low thermal conductivity and heat loss, reducing condensation
  • 06High-density polyethylene matrix gives good hygiene and dimensional stability

Specifications

Mechanical properties
PropertyRequirementTest method
环刚度 (KN/m²)>8GB/T 9547
纵向回缩率(100℃,1h)<0.3%GB/T 6671
受压开裂稳定性不破裂GB/T 37263
内外表面电阻≤1.0×10⁶ ΩMT181
静液压 20℃ 1h PN×1.5不破裂、不渗漏GB/T 6111
静液压 70℃ 165h PN×1.5×0.71不破裂、不渗漏GB/T 6111
静液压 90℃ 165h PN×1.5×0.61不破裂、不渗漏GB/T 6111
爆破压力≥3×PN爆破

Selection notes

  • 01Burst testing is not mandatory when dn ≥ 250

In the field

Medical-Grade Steel-Plastic Composite Pipe
Medical-Grade Steel-Plastic Composite Pipe

Related

Steel-Plastic Pipe

Equipment that works in the same process stage — specified and supplied as a set.