
PP-ZL(W) · Storage & Heat Transfer
PP Storage Tank
0.5–100 m³ atmospheric tanks, vertical or horizontal

Overview
A one-piece filament-wound PPH atmospheric storage tank. The range combines good corrosion resistance with sound mechanical properties, rational design, a complete size range, safe operation, low cost and long life — the preferred vessel for storing corrosive media in chemical, pharmaceutical, food, extraction and metallurgical production.
ChemicalPharmaceuticalFoodMetallurgyExtraction
Characteristics
- 01One-piece PPH winding for atmospheric storage at ambient temperature
- 020.5 to 100 m³, vertical (L) or horizontal (W)
- 03Nozzles configured to order: inlet, outlet, level, manway and drain
- 04Tanks above 5 m³ are not supported on plastic saddles
- 05Wall thickness increases with volume for structural stability
- 06Agitation, coils and insulation available as options
Specifications
| Volume (m³) | DN (mm) | L (mm) | a Inlet | b Vent | d Outlet | h Manway |
|---|---|---|---|---|---|---|
| 1 | 1000 | 1200 | DN50 | DN50 | DN50 | / |
| 2 | 1200 | 1800 | DN50 | DN50 | DN50 | / |
| 3 | 1400 | 2000 | DN50 | DN50 | DN50 | / |
| 4 | 1600 | 2000 | DN50 | DN50 | DN50 | / |
| 5 | 1600 | 2500 | DN50 | DN50 | DN50 | / |
| 10 | 2000 | 3300 | DN50 | DN50 | DN50 | DN450 |
| 20 | 2500 | 4200 | DN50 | DN50 | DN50 | DN450 |
| 30 | 3000 | 4300 | DN65 | DN65 | DN65 | DN450 |
| 50 | 3500 | 5200 | DN65 | DN65 | DN65 | DN450 |
| 100 | 4000 | 8000 | DN80 | DN80 | DN80 | DN500 |
Selection notes
- 01Vertical tanks require a sound foundation, bedded on 2–6 cm of fine sand
In the field



