
PE-CP · Steel-Plastic Pipe
Porous Steel Belt PE Composite Pipe
Cold-rolled steel-belt welded skeleton, 50-year design life

Overview
A composite pipe built around a skeleton of cold-rolled steel strip welded into a perforated mesh cage and compounded with thermoplastic. The reinforcing cage raises pressure rating markedly. Our porous steel-belt PE composite pipe is produced in potable-water and industrial grades and also serves agriculture, pharmaceutical and mining duties.
Potable waterChemicalMiningOil & gas fieldIrrigation
Characteristics
- 01High stiffness and impact resistance — better suited than plain plastic pipe to above-ground routing
- 02Expansion coefficient close to steel, tolerant of ambient temperature swings
- 03Good corrosion and abrasion resistance, preserving hydraulic characteristics over time
- 04Light weight, easy to transport and install, simple welding procedure
- 05Green and non-polluting; designed for a 50-year service life
Specifications
| Outside dia. D (mm) | Wall (mm) | Nominal pressure, water (MPa) | Nominal pressure, industrial (MPa) |
|---|---|---|---|
| 50 | ≥6.0 | 1.6 | 1.6 |
| 63 | ≥6.5 | 1.6 | 1.6 |
| 75 | ≥7.0 | 1.6 | 1.6 |
| 90 | ≥8.0 | 1.6 | 1.6 |
| 110 | ≥9.0 | 1.6 | 1.6 |
| 140 | ≥9.0 | 1.6 | 1.6 |
| 160 | ≥10.0 | 1.6 | 1.6 |
| 200 | ≥11.0 | 1.6 | 1.6 |
| 225 | ≥11.5 | 1.6 | 1.6 |
| 250 | ≥12.0 | 1.6 | 1.6 |
| 280 | ≥12.5 | 1.6 | 1.6 |
| 315 | ≥13.0 | 1.25 | 1.6 |
| 355 | ≥14.0 | 1.25 | 1.25 |
| 400 | ≥15.0 | 1.25 | 1.25 |
| 450 | ≥15.5 | 1.25 | 1.25 |
| 500 | ≥16.0 | 1.25 | 1.25 |
| 630 | ≥17.0 | 1.0 | 1.0 |
Selection notes
- 01Standards: CJ/T 181-2003, HG/T 3706-2014
- 02Joined with electrofusion couplers for a reliable, fast installation
In the field


